For a fully multipurpose, more cost-effective tractor! As well as the rear linkage, MX Front Linkages enable 2 implements to be attached to the tractor. With this combination, you can perform two operations in just one sweep! Results: maximum performance with less mechanical effort.
Capacity
- Front linkage category – 2
- Lifting power at the ends of the lifting arms* (in kg) – 5,300
- Theoretical arm spacing between ball joints (in mm) – 825
Advantages
-
SHARED COMPONENTS: A HIGHLY ECONOMICAL SOLUTIONThe chassis, rear supports, control, hydraulic control valve and shock absorber are all common to MX loaders and front linkages. With the MX loader/MX front linkage combination, the loader bracket substitutes for the linkage chassis.
-
3 WORKING POSITIONSHigh and low positions: 100 mm gain – Floating position: allows ground contour to be followed (e.g. front mower)
- PROTECTED PIVOT POINTS
Pins with accessible integral grease nipples. Bi-metal wear bushes for a longer service life. -
MADE-TO-MEASURE FRAMEEach tractor model is studied, to ensure perfect integration of the loader and front linkage. Attachment is secured by using conical washers on the sides and face of the front casting.
