The Kubota PH2001 Series Rigid Power Harrows are designed for heavy conditions and tractors up to 180 PTO hp. Working widths in this series are from 3 m to 4 m, with matching transport width. Lower weight but strong design mean efficient performance in a range of conditions, with minimal power requirement and less fuel consumption. There’s 90 mm of clearance between the trough bottom and tine holder, and fully welded rotor housings ensure high bend and torque resistance in very tough soils. Optimum performance and low power consumption is further achieved by closer inter-tine carrier distance (250 mm) and helical tine drive layout. The Kubota PH2001 Series provides optimum performance in difficult soils, with a robust trough and large clearance between the tine holder and trough bottom. This allows large amounts of residues and stones to pass freely and provides excellent results in mulch conditions. The PH2001 Series has two profiled 6 mm plates ensuring precise rotor spacing, and high bend resistance in the 140 x 400 mm trough. Like all Kubota power harrows, there are 4 rotors per metre of trough.